Steel purlin is usually made of cold-formed steel that is thin enough to put screws through. Cold-formed steel is made by rolling or pressing thin sheets of steel into the desired shape. Usually in "C" shape or "Z" shape. Purlins are most commonly used in Metal Building Systems, where Z-shapes are utilized in a manner that allows flexural continuity between spans.
Purlins are secondary steel framing members used for roof and wall support as well as a header, sill, brace, and more.
Pre-punching service of Z steel frame:
In order to make construction on-site faster and easier,steel Z purlins could be pre-punched in our factory.
There is two kinds of holes we have,as per Chinese GB standards,round holes and elongated holes.which is as per the following picture showing:
Holes are made during production at continuous line,some additional notes are showing as follows:
Holes can be made in a row or positions as per your design;
Oval and rectangular holes can be rotated by 90°;
Please contact us for additional information about the pre-punching possibilities,if you have any special hole punching requirement about hole size and hole shapes.
Advantages
(1) Design according to customers' requirements
(2) Manufacture under complete quality certification system--ISO9001
(3) Installation with instruction of experienced engineers
(4) Easy to assemble and dismantle
(5) Eco-friendly material: Used for several times and be recycled
(6) Shorter construction period, longer using time
(7) High strength and stiffness, high weight bearing.
